| Availability: | |
|---|---|
| Quantity: | |
The most-used surface in a care bedroom is not the bed. It is the place where glasses, the hearing aid, the medication tray and a jug of water get put down. In this room that place is built in: the wardrobe carries a full-height mirror and an open niche with two shelves and two drawers at standing height. Nothing has to be reached for below the knee, and nothing has to be found inside a drawer.
Alongside it, the L-shaped desk wraps the corner at 1400 × 1400 — a writing and video-call surface for the resident on one arm, and a return where a carer can sit down with a care plan instead of standing over the bed.

| No. | Model | Item | Size (mm) |
|---|---|---|---|
| 01 | YL-E4309 | Bed ×2 | 2050 × 1200 × 280 |
| 02 | YL-B1313 | Bedside cabinet | 500 × 450 × 500 |
| 03 | YL-B1130 | Wardrobe with mirror | 86 + 625 + 850 × 600 × 2300 |
| 04 | YL-B1143 | Luggage bench | 800 × 500 × 600 |
| 05 | YL-G6008 | TV console | 1500 × 400 × 750 |
| 06 | YL-D3411 | L-shaped desk | 1400 × 1400 × 750 |
| 07 | YL-C2628 | Task chair | 510 × 550 × 850 |
| 08 | YL-B1136 | Open bookshelf | 1000 × 300 × 1800 |
A standing-height niche instead of a dressing table. Mirror, shelves and two drawers where a person actually stands — the corner a dressing table normally takes is given back to circulation.
Two 1200 mm beds, not one double. A couple keeps sleeping together after the move; or a companion, carer or grandchild stays the night without a camp bed in the corridor.
E1 board, because the room is lived in 24 hours a day. Low-formaldehyde board and a sealed melamine face matter more here than in a hotel: the resident is in the room all day and the heating runs all winter.
A face that takes a disinfectant wipe. Melamine over veneer, with the PVC edge band closing the board edge so no open seam holds moisture or soil.
An L-shaped desk that gives the carer a chair. Resident's surface on one arm, documentation and a laptop on the other — no leaning over a bed to write notes.
Open shelving, 300 mm deep. Objects stay visible, which matters for residents living with memory loss, and the unit is shallow enough not to narrow the route past the bed.

The brief was a repeated twin room in a senior living building: two adults, one of whom may need support, housekeeping daily, and a property team that has to re-order the same wardrobe in phase two.
Those facts decided the materials before the design. Veneer was ruled out: a melamine face holds its colour across production batches, takes a wipe without going dull, and can be re-edged on site when a door is damaged — which is what actually happens across a ten-year fit-out. E1 board is the part a care operator's safety file will ask about, so it is specified up front rather than offered as an upgrade.
The palette stays quiet on purpose. Maple gives warmth without yellowing; warm white carcass interiors make a cupboard read light the moment it opens; grey headboards take the echo out of a hard-floored room; navy is confined to the bedding so the room reads as a bedroom rather than a ward.
Detail sits where hands go: the mirror set flush into the door frame, the niche at exactly standing height, drawer fronts in the same face as the carcass so the elevation stays calm, and a bench low enough to sit on while putting shoes back on.

The plan on this page is drawn from the printed product data — bed 2050 × 1200, wardrobe 600 deep, desk 1400 × 1400 — with the walls, door and window set from the reference photograph. Send a measured plan and we return the same drawing to your dimensions, with door swings and clear widths checked against your local accessibility requirement

Guangdong Hongye Furniture Group Co., Ltd. (HONGYE) is a commercial furniture manufacturer founded in 1996, headquartered in Heshan, Jiangmen, Guangdong, China. Over 30 years the company has built six product lines — hotel, office, healthcare, education, apartment and banking furniture — so a hospital project can be furnished from one factory rather than assembled from several suppliers.
The production facility covers 300,000 m² with 10+ production lines, 40,000 m² of exhibition space and 1,000+ skilled workers. Core equipment includes German HOMAG edge-banding lines and Italian BACCI five-axis CNC machining centres, with panel processing, solid wood joinery, metal fabrication, upholstery, stone cutting and finishing integrated under one roof.
HONGYE has completed more than 1,000 commercial furniture projects across 50+ countries and regions. International references include Alibaba Headquarters, Holiday Inn in America, Four Seasons in Saudi Arabia, Charterhouse Lagos in Nigeria, a behavioural health unit in Saudi Arabia and a dementia care facility in Singapore.
Quality is verified through 8 international certifications: ISO 9001 (Quality Management), ISO 14001 (Environmental Management), BIFMA, GREENGUARD, SGS, CE, CARB P2 and FSC. Products are tested for durability, safety and low chemical emissions to meet contract-grade standards in global markets.



Company Introduction and Advantages
Produced on HONGYE's own metal line with the same finish system as the wider storage range, so dividers, storage walls and lockers arrive as one scheme — see §0.1. Our project team supports layout drawings for whole floors rather than single cabinets, which is what open office planning needs.







Delivery & Returns
Production:built to the confirmed divider run
Shipping terms:(FOB / CIF / DDP quoted on request)
Packing:export carton with corner protection, loading plan provided
Documents:packing list and commercial invoice with the shipment
Returns:transit damage replaced against carrier evidence ;custom sizes non-returnable
FAQ
How many pieces are in the set? Eleven: care bed, bedside cabinet, wardrobe, washbasin cabinet, two lounge chairs, round table, desk chair, desk, TV console and shoe bench.
Can I order only part of the set? Yes. Each model is a standalone product; the set is a specification convenience, not a fixed bundle.
Is the care bed adjustable? — confirm the backrest and height adjustment range before publishing this answer.
What are the bed dimensions? 2100 × 1200 × 1100 mm. The mattress platform is a wide single.
What is it made of? E1-grade solid-wood multi-layer board with maple veneer and matte white lacquer panels, finished with a low-VOC lacquer. The bed frame is steel with powder coating.
Can the finish be changed? Yes — veneer, lacquer colour and upholstery are specified per project. [FINISH_RANGE]
Is it suitable for a private apartment? Yes. The residential appearance is the reason many buyers use it in assisted-living apartments rather than in a ward.
Do you provide layout drawings? Yes, on receipt of a room plan. The sheet on this page is a schematic; the drawing we return is set to your wall dimensions.
What should buyers verify when specifying behavioral health furniture? Review the product's construction, accessible components, installation, cleanability and maintenance requirements against the facility's room-specific environmental risk assessment. Then confirm that drawings, product documentati
What should a medical examination room furniture specification include? Start with the room's clinical function and layout, then record each item’s model, dimensions, load limits, materials, cleaning instructions, installation requirements and supporting documents. Verify the complete room through a
What furniture does a senior living community need? The furniture package depends on the level of care, resident mobility and daily routines. Typical requirements include bedroom furniture, supportive lounge and dining seating, personal storage, activity furniture and staff-support areas. Medical be
Bariatric healthcare furniture should be selected against defined user needs, operating conditions and product evidence—not a “heavy-duty” label alone.Before comparing products, confirm what the manufacturer's capacity rating means, whether the dimensions suit the intended users and whether the equi
How do you choose a hospital bed? Start with the patient population, intended care setting, transfer needs and repositioning requirements. Then compare adjustment systems, overall dimensions, maximum patient weight, safe working load, mattress compatibility, safety documentation and service support.
How do you choose a medical furniture manufacturer or supplier? Start by matching the supplier's product range to your care environment. Then verify product-specific documentation, cleaning compatibility, customization, installation support, warranty terms and delivery capacity. Compare quotations a